 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Cover the hot burner with decorative top. The catalytic lamp is working now. 30 to 40 minutes of use is enough to clean and fragrance the air in the room. Warning: Do not touch the burner during the process of operation; the temperature of the burner is very high |
| To extinguish the catalytic process, first close the lamp with the solid cap until it is tightly sealed, then place the decorative cap on top. |
| Light the burner and leave the flame for 3 minutes, or until it recedes. Then blow it out. Warning: Never place the solid or decorative top over the flame, before blowing it out. |
| Insert the wick/burner in the lamp, cover with the solid cap. When using the wick for the first time, let it soak for at least 20 minutes before moving on to step 4. |
| Place the catalytic lamp on a stable surface far from any flammable substance or heat source. Remove the decorative and solid tops. |
| Pour the fragrance into the lamp, and thoroughly wipe any excess liquid on the outer surface of the lamp. Do not fill more than 3/4 of the lamp. |
| Keep away from children. Keep away from open flames. If swallowed, seek medical advice. When the lamp is not in use, keep it closed with the solid top to prevent fragrance evaporation. |
| Lamp Instructions |